Select a patient, Manage patient records – Welch Allyn Connex Integrated Wall System - User Manual User Manual
Page 62

Note
If the monitor is connected to the network, the monitor can receive a patient name
from patient records associated with a scanned ID number.
1. Ensure that you are on the Home tab.
2. Scan the patient's barcode with the barcode scanner.
The Patient ID appears in the Patient frame.
CAUTION Verify patient identity on the monitor after manual or barcode entry and
before printing or transferring patient records.
Select a patient
1. Touch the Patients tab.
2. If the monitor is connected to the network, touch Retrieve list on the List tab.
The monitor retrieves the patient list from the network.
3. From the patient list, touch the patient's identifier (name, ID number, or location).
The patient's identifier is determined in Advanced settings.
4. Touch Select.
Note
In the Spot Check and Triage profiles, previous patient data will be
overwritten by a new save. In the Monitor profile, selecting a new
patient will clear the current patient data and readings.
Patient data can be sorted in ascending or descending order by selecting the heading row and
touching ▲ or ▼.
Manage patient records
Patient records can be sent to the network, printed, or deleted.
1. Touch the Review tab.
Note
Measurements that triggered a physiological alarm are highlighted
on this tab.
2. Select patients by touching the check box next to their names.
3. Touch Send to transmit the records to the network, Print to print the records, or Delete to
permanently remove the records as desired.
56 Patient data management
Welch Allyn Connex
®
Integrated Wall System