Kontron AT890X Full-Size CLI - Manual (Page 88)

Switching Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 2 - 54
Format
no port lacpmode
Mode Interface Config
2.12.7 port lacpmode all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format port lacpmode all
Mode Global Config
2.12.7.1 no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
no port lacpmode all
Mode Global Config
2.12.8 port-channel adminmode
This command enables a port-channel (LAG). The option all sets every configured
port-channel with the same administrative mode setting.
Format
port-channel adminmode [all]
Mode Global Config
2.12.8.1 no port-channel adminmode
This command disables a port-channel (LAG). The option
all
sets every configured
port-channel with the same administrative mode setting.
Format
no port-channel adminmode [all]
Mode Global Config
2.12.9 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The
interface is a logical unit/slot/port for a configured port-channel. The option
all
sets
every configured port-channel with the same administrative mode setting.
Default enabled
Format port-channel linktrap {unit/slot/port> | all}
Mode Global Config
2.12.9.1 no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The
interface is a logical slot and port for a configured port-channel. The option
all sets
every configured port-channel with the same administrative mode setting.
Format
no port-channel linktrap {unit/slot/port> | all}
Mode Global Config