Kontron AT890X Full-Size CLI - Manual (Page 248)

Management Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 6 - 6
the Global Config mode, you can enter other command modes, including Line Config
mode.
Format configuration
Mode Privileged EXEC
6.2.2 lineconfig
This command gives you access to the Line Config mode, which allows you to
configure various Telnet settings and the console port.
Format
lineconfig
Mode Global Config
6.2.3 serial baudrate
This command specifies the communication rate of the terminal interface. The
supported rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
Default 9600
Format
serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400
| 57600 | 115200}
Mode Line Config
6.2.3.1 no serial baudrate
This command sets the communication rate of the terminal interface.
Format no serial baudrate
Mode Line Config
6.2.4 serial timeout
This command specifies the maximum connect time (in minutes) without console
activity. A value of 0 indicates that a console can be connected indefinitely. The time
range is 0 to 160.
Default 5
Format serial timeout <0-160>
Mode Line Config
6.2.4.1 no serial timeout
This command sets the maximum connect time (in minutes) without console activity.
Format
no serial timeout
Mode Line Config
6.2.5 show serial
This command displays serial communication settings for the switch.
Format
show serial