Kontron AT890X Full-Size CLI - Manual (Page 188)

Quality of Service (QoS) Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 4 - 22
Non-Conform DSCP Value This field displays the DSCP mark value if the non-con-
form action is set-dscp-transmit.
Non-Conform IP Precedence Value This field displays the IP Precedence mark
value if the non-conform action is set-prec-transmit.
Policing Style This field denotes the style of policing, if any, used (simple).
Redirect
Forces a classified traffic stream to a specified egress port (physical
port or LAG). This can occur in addition to any marking or policing
action. It may also be specified along with a QoS queue assignment.
This field does not display on Broadcom 5630x platforms.
If the Policy Name is not specified this command displays a list of all defined DiffServ
policies. The following fields are displayed:
Policy Name The name of this policy. (The order in which the policies are displayed
is not necessarily the same order in which they were created.)
Policy Type The policy type (Only inbound is supported).
Class Members List of all class names associated with this policy.
4.6.4 show diffserv service
This command displays policy service information for the specified interface and
direction. The
< unit/slot/port > parameter specifies a valid unit/slot/port number for the
system.
Format
show diffserv service <unit/slot/port> in
Mode Privileged EXEC
DiffServ Admin Mode The current setting of the DiffServ administrative mode. An
attached policy is only in effect on an interface while DiffServ is in an
enabled mode.
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
Operational Status The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direc-
tion.
Policy Details Attached policy details, whose content is identical to that described for
the show policy-map command (content not
repeated here for brevity).
4.6.5 show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been
attached. The inbound direction parameter is optional.
Format
show diffserv service brief [in]
Mode Privileged EXEC