Kontron AT890X Full-Size CLI - Manual (Page 276)

Management Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 6 - 34
These connections may create bridging loops when enabled. During normal operation,
it is often useful to completely separate the redundant hub boards and thus create up to
four independent switching/bridging domains.
The boards come with a script installed that disables the interlinks. This script can be
applied to disable the respective interfaces, i.e.
•
interface 0/19 for the base fabric (AT801/2)
• interface 0/5 and 0/6 for the extension fabric This commands sets the connection of
an AMC to a storage modul on another AMC or on local board (AT8902 only).
Format
script apply nointerl.scr
Mode Privileged EXEC
6.10.3 script delete
This command deletes a specified script where the parameter is the
name of the script to delete. The option deletes all the scripts present on the
switch.
Format script delete { | all}
Mode Privileged EXEC
6.10.4 script list
This command lists all scripts present on the switch as well as the remaining available
space.
Format
script list
Mode Global Config
Configuration Script Name of the script.
Size
Privileged EXEC
6.10.5 script show
This command displays the contents of a script file, which is named .
Format script show
Mode Privileged EXEC
Output Format
line :
6.10.6 script validate
This command validates a script file by parsing each line in the script file where
is the name of the script to validate.The validate option is intended to be
used as a tool for script development. Validation identifies potential problems. It might
not identify all problems with a given script on any given device.
Format script validate
Mode Privileged EXEC