Kontron AT890X Full-Size CLI - Manual (Page 138)

Routing Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 3 - 26
3.7.6 area nssa (OSPF)
This command configures the specified areaid to function as an NSSA.
Format
area nssa
Mode Router OSPF Config
3.7.6.1 no area nssa
This command disables nssa from the specified area id.
Format no area nssa
Mode Router OSPF Config
3.7.7 area nssa default-info-originate (OSPF)
This command configures the metric value and type for the default route advertised
into the NSSA. The optional metric parameter specifies the metric of the default route
and is to be in a range of 1-16777214. If no metric is specified, the default value is
****. The metric type can be comparable (nssa-external 1) or non-comparable (nssa-
external 2).
Format area nssa default-info-originate []
[{comparable | non-comparable}]
Mode Router OSPF Config
3.7.8 area nssa no-redistribute (OSPF)
This command configures the NSSA Area Border router (ABR) so that learned
external routes will not be redistributed to the NSSA.
Format area nssa no-redistribute
Mode Router OSPF Config
3.7.9 area nssa no-summary (OSPF)
This command configures the NSSA so that summary LSAs are not advertised into the
NSSA.
Format
area nssa no-summary
Mode Router OSPF Config
3.7.10 area nssa translator-role (OSPF)
This command configures the translator role of the NSSA. A value of
always
causes
the router to assume the role of the translator the instant it becomes a border router and
a value of
candidate
causes the router to participate in the translator election process
when it attains border router status.
Format
area nssa translator-role {always | candidate}
Mode Router OSPF Config