Kontron AT890X Full-Size CLI - Manual (Page 246)

Management Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 6 - 4
Default burnedin
Format
network mac-type {local | burnedin}
Mode Privileged EXEC
6.1.7.1 no network mac-type
This command resets the value of MAC address to its default.
Format no network mac-type
Mode Privileged EXE
6.1.8 network javamode
This command specifies whether or not the switch should allow access to the Java
applet in the header frame of the Web interface. When access is enabled, the Java
applet can be viewed from the Web interface. When access is disabled, the user cannot
view the Java applet.
Default enabled
Format network javamode
Mode Privileged EXEC
6.1.8.1 no network javamode
This command disallows access to the Java applet in the header frame of the Web
interface. When access is disabled, the user cannot view the Java applet.
Format
no network javamode
Mode Privileged EXEC
6.1.9 show network
This command displays configuration settings associated with the switch's network
interface. The network interface is the logical interface used for in-band connectivity
with the switch via any of the switch's front panel ports. The configuration parameters
associated with the switch's network interface do not affect the configuration of the
front panel ports through which traffic is switched or routed.
Format
show network
Modes Privileged EXEC
User EXEC
IP Address The IP address of the interface. The factory default value is 0.0.0.0
Subnet Mask The IP subnet mask for this interface. The factory default value is
0.0.0.0
Default Gateway The default gateway for this IP interface. The factory default value
is 0.0.0.0
Burned In MAC Address The burned in MAC address used for in-band connectiv-
ity.