Kontron AT890X Full-Size CLI - Manual (Page 46)

Switching Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 2 - 12
2.2.14.1 no spanning-tree mst vlan
This command removes an association between a multiple spanning tree instance and a
VLAN so that the VLAN is again be associated with the common and internal
spanning tree. The parameter
is a number that corresponds to the desired
existing multiple spanning tree instance. The corresponds to an existing
VLAN ID.
Format
no spanning-tree mst vlan
Mode Global Config
2.2.15 spanning-tree port mode
This command sets the Administrative Switch Port State for this port to enabled.
Default disabled
Format spanning-tree port mode
Mode Interface Config
2.2.15.1 no spanning-tree port mode
This command sets the Administrative Switch Port State for this port to disabled.
Format
no spanning-tree port mode
Mode Interface Config
2.2.16 spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to enabled.
Default disabled
Format
spanning-tree port mode all
Mode Global Config
2.2.16.1 no spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to disabled.
Format no spanning-tree port mode all
Mode Global Config
2.2.17 show spanning-tree
This command displays spanning tree settings for the common and internal spanning
tree. The following details are displayed.
Format
show spanning-tree
Modes Privileged EXEC
User EXEC
Bridge Priority Specifies the bridge priority for the Common and Internal Spanning
tree (CST). The value lies between 0 and 61440. It is displayed in mul-
tiples of 4096.