Kontron AT890X Full-Size CLI - Manual (Page 144)

Routing Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 3 - 32
leave the Overflow State. This allows the router to again originate non-default AS-
external-LSAs. When set to 0, the router will not leave Overflow State until restarted.
The range for seconds is 0 to 2147483647 seconds.
Default 0
Format
exit-overflow-interval
Mode Router OSPF Config
3.7.25.1 no exit-overflow-interval
This command configures the default exit overflow interval for OSPF.
Format no exit-overflow-interval
Mode Router OSPF Config
3.7.26 external-lsdb-limit (OSPF)
This command configures the external LSDB limit for OSPF. If the value is -1, then
there is no limit. When the number of non-default AS-external-LSAs in a router's link-
state database reaches the external LSDB limit, the router enters overflow state. The
router never holds more than the external LSDB limit non-default AS-external-LSAs
in it database. The external LSDB limit MUST be set identically in all routers attached
to the OSPF backbone and/or any regular OSPF area. The range for limit is -1 to
2147483647.
Default -1
Format
external-lsdb-limit
Mode Router OSPF Config
3.7.26.1 no external-lsdb-limit
This command configures the default external LSDB limit for OSPF.
Format
no external-lsdb-limit
Mode Router OSPF Config
3.7.27 ip ospf areaid
This command sets the OSPF area to which the specified router interface belongs. The
is an IP address, formatted as a 4-digit dotted-decimal number or a decimal
value in the range of <0-4294967295>. The uniquely identifies the area to
which the interface connects. Assigning an area id, which does not exist on an
interface, causes the area to be created with default values.
Format
ip ospf areaid <areaid>
Mode Interface Config
3.7.28 ip ospf authentication
This command sets the OSPF Authentication Type and Key for the specified interface.
The value of <
type
> is either none, simple or encrypt. The [
key
] is composed of
standard displayable, non-control keystrokes from a Standard 101/102-key keyboard.