Kontron AT890X Full-Size CLI - Manual (Page 229)

AT8901/2/3 Utility Commands
Page 5 - 31 AT8901/2/3 CLI Reference Manual
5.8.7.1 no sntp multicast client poll-interval
This command resets the poll interval for SNTP multicast clients to its default value.
Format
no sntp multicast client poll-interval
Mode Global Config
5.8.8 sntp server
This command configures an SNTP server (a maximum of three). The optional priority
can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535.
Format
sntp server [ [
[]]]
Mode Global Config
5.8.8.1 no sntp server
This command deletes an server from the configured SNTP servers.
Format. no sntp server remove
Mode Global Config
5.8.9 show sntp
This command is used to display SNTP settings and status.
Format
show sntp
Mode Privileged EXEC
Last Update Time Time of last clock update.
Last Attempt Time Time of last transmit query (in unicast mode).
Last Attempt Status Status of the last SNTP request (in unicast mode) or unsolicited
message (in broadcast mode).
Broadcast Count Current number of unsolicited broadcast messages that have been
received and processed by the SNTP client since last reboot.
Multicast Count Current number of unsolicited multicast messages that have been
received and processed by the SNTP client since last reboot
5.8.10 show sntp client
This command is used to display SNTP client settings.
Format show sntp client
Mode Privileged EXEC
Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports
Port
SNTP Client Port
Client Mode Configured SNTP Client Mode
Poll Interval Poll interval value for SNTP clients in seconds as a power of two.