Kontron AT890X Full-Size CLI - Manual (Page 151)

AT8901/2/3 Routing Commands
Page 3 - 39 AT8901/2/3 CLI Reference Manual
Redistribute into NSSA Shows whether to redistribute information into the NSSA.
Default Information Originate Shows whether to advertise a default route into the
NSSA
Default Metric Shows the metric value for the default route advertised into the
NSSA.
Default Metric Type Shows the metric type for the default route advertised into the
NSSA.
Translator Role Shows the NSSA translator role of the ABR, which is always or can-
didate.
Translator Stability Interval Shows the amount of time that an elected translator
continues to perform its duties after it determines that its translator sta-
tus has been deposed by another router.
Translator State Shows whether the ABR translator state is disabled, always, or
elected.
3.7.43 show ip ospf border-routers
This command displays the internal OSPF routing table entries to an Area Border
Router (ABR) and Autonomous System Boundary Router (ASBR).
Format
show ip ospf border-routers
Modes User EXEC
Privileged EXEC
The command displays a table with the following column headings:
Type The type of the route to the destination, which is one of the following
values:
intra - Intra-area route
inter - Inter-area route
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Router Type The router type of the destination; it is either an ABR or ASBR or
both.
Next Hop Address of the next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the
next hop.
3.7.44 show ip ospf database
This command displays information about the link state database when OSPF is
enabled. If you do not enter any parameters, the command displays the LSA headers
for all areas. Use the optional
parameter to display database information
about a specific area. Use the optional parameters to specify the type of link state
advertisements to display. Use
asbr-summary
to show the autonomous system
boundary router (ASBR) summary LSAs. Use external to display the external LSAs.