Kontron AT890X Full-Size CLI - Manual (Page 277)

AT8901/2/3 Management Commands
Page 6 - 35 AT8901/2/3 CLI Reference Manual
6.11 Pre-login Banner and System Prompt Commands
This section describes the commands you use to configure the pre-login banner and the
system prompt. The pre-login banner is the text that displays before you login at the
User:
prompt.
6.11.1 copy (pre-login banner)
The
copy
command includes the option to upload or download the CLI Banner to or
from the switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or
Zmodem.
Default none
Format
copy //> nvram:cli-
banner
copy nvram:clibanner //name>>
Mode Privileged EXEC
6.11.2 set prompt
This command changes the name of the prompt. The length of name may be up to 64
alphanumeric characters.
Format
set prompt
Mode Privileged EXEC
6.12 Watchdog support
The IPMC based hardware watchdog supervises board operation. There are 4 distinct
stages in the lifecycle of the system where different watchdog timers and actions are
used.
All watchdog parameters are stored in the bootloader environment. All times are in
seconds. All watchdog events will power cycle the board when the watchdog expires.
•
BIST watchdog during BIST
• OS loader watchdog during loading of kernel and INITRD
• Application Startup watchdog during startup of switching application
• Application Running watchdog during normal execution of switching application
6.12.1 show watchdog
This command displays the watchdog settings. It displays the values (or string
“disabled”) of different watchdog (during BIST, during loading of kernel and INITRD,
during startup of switching application and during normal execution of switching
application) and the heartbeat of the fpmux application.
Format
show watchdocg
Mode Privileged EXEC