Kontron AT890X Full-Size CLI - Manual (Page 225)

AT8901/2/3 Utility Commands
Page 5 - 27 AT8901/2/3 CLI Reference Manual
Table 8. Copy Parameters
Source Destination Description
nvram:clibanner Copies the CLI banner to a server.
nvram:errorlog Copies the error log file to a server.
nvram:log Copies the log file to a server.
nvram:script
Copies a specified configuration script
file to a server.
nvram:startup-con-
fig Copies the startup configuration to a
server.
nvram:traplog Copies the trap log file to a server.
system:running-
config nvram:startup-
config Saves the running configuration to
nvram.
nvram:clibanner Downloads the CLI banner to the sys-
tem.
nvram:script
Downloads a configuration script file
to the system. During the download of
a configuration script, the copy com-
mand validates the script. In case of
any error, the command lists all the
lines at the end of the validation pro-
cess and prompts you to confirm before
copying the script file.
nvram:sshkey-dsa Downloads an SSH key file. For more
information, see 6.4 “Secure Shell
(SSH) Command” on page 6 - 11.
nvram:sshkey-
rsa1 Downloads an SSH key file.
nvram:sshkey-
rsa2 Downloads an SSH key file.
nvram:sslpem-
dhweak Downloads an HTTP secure-server cer-
tificate.
nvram:sslpem-
dhstrong Downloads an HTTP secure-server cer-
tificate.
nvram:sslpem-
root Downloads an HTTP secure-server cer-
tificate.
nvram:sslpem-
server Downloads an HTTP secure-server cer-
tificate.
nvram:startup-
config Downloads the startup configuration
file to the system.
nvram:system-
image Downloads a code image to the system.
{image1 |
image2} Download an image from the remote
server to either image.
{image1 | image2} Upload either image to the remote
server.