Kontron AT890X Full-Size CLI - Manual (Page 274)

Management Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 6 - 32
parameter specifies the key name. For an empty string use “ ”. (Range:
0 - 128 characters).
Format key
Mode TACACS Config
6.9.5 port
Use the port command in TACACS Configuration mode to specify a server port
number. The server range is 0 - 65535.
Default 49
Format
port
Mode TACACS Config
6.9.6 priority
Use the
priority
command in TACACS Configuration mode to specify the order in
which servers are used, where 0 (zero) is the highest priority. The
parameter specifies the priority for servers. The highest priority is 0 (zero), and the
range is 0 - 65535.
Default 0
Format
priority
Mode TACACS Config
6.9.7 timeout
Use the
timeout
command in TACACS Configuration mode to specify the timeout
value in seconds. If no timeout value is specified, the global value is used. The
parameter has a range of 1-30 and is the timeout value in seconds.
Format
timeout
Mode TACACS Config
6.9.8 show tacacs
Use the show tacacs command to display the configuration and statistics of a
TACACS+ server.
Format
show tacacs []
Mode Privileged EXEC
IP address Shows the IP address of the configured TACACS+ server.
Port Shows the configured TACACS+ server port number.
TimeOut Shows the timeout in seconds for establishing a TCP connection.
Priority Shows the preference order in which TACACS+ servers are contacted.
If a server connection fails, the next highest priority server is con-
tacted.