5 sntp unicast client poll-timeout, 6 sntp unicast client poll-retry, 7 sntp multicast client poll-interval – Kontron AT890X Full-Size CLI User Manual
Page 228: Sntp unicast client poll-timeout - 30, Sntp unicast client poll-retry - 30, Sntp multicast client poll-interval - 30
Utility Commands
AT8901/2/3
AT8901/2/3 CLI Reference Manual
Page 5 - 30
Default
6
Format
sntp unicast client poll-interval
Mode
Global Config
5.8.4.1
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
Format
no sntp unicast client poll-interval
Mode
Global Config
5.8.5
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value
from 1-30.
Default
5
Format
sntp unicast client poll-timeout
Mode
Global Config
5.8.5.1
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
Format
no sntp unicast client poll-timeout
Mode
Global Config
5.8.6
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
Default
1
Format
sntp unicast client poll-retry
Mode
Global Config
5.8.6.1
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Format
no sntp unicast client poll-retry
Mode
Global Config
5.8.7
sntp multicast client poll-interval
This command will set the poll interval for SNTP multicast clients in seconds as a
power of two where
can be a value from 6 to 16.
Default
6
Format
sntp multicast client poll-interval
Mode
Global Config