Kontron AT890X Full-Size CLI - Manual (Page 170)

Quality of Service (QoS) Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 4 - 4
Default dot1p
Format
classofservice trust {dot1p | ip-dscp | ip-precedence |
untrusted}
Mode Global Config
Interface Config
4.1.4.1 no classofservice trust
This command sets the interface mode to the default value.
Format
no classofservice trust
Modes Global Config
Interface Config
4.1.5 cos-queue min-bandwidth
This command specifies the minimum transmission bandwidth guarantee for each
interface queue. The total number of queues supported per interface is platform
specific. A value from 0-100 (percentage of link rate) must be specified for each
supported queue, with 0 indicating no guaranteed minimum bandwidth. The sum of all
values entered must not exceed 100.
Format
cos-queue min-bandwidth …
Modes Global Config
Interface Config
4.1.5.1 no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
Format
no cos-queue min-bandwidth
Modes Global Config
Interface Config
4.1.6 cos-queue strict
This command activates the strict priority scheduler mode for each specified queue.
Format. cos-queue strict [ … n>]
Modes Global Config
Interface Config
4.1.6.1 no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format no cos-queue strict [ … id-n>]
Modes Global Config
Interface Config