B&G H2000 Pilot *DISCONTINUED* - Manual (Page 97)

HB-0845-06 97
Full details are given in Examples of Calibration contained
in Chapter 2 - Operating Information.
Wind
Stbd Tack
Sails sheeted
close hauled Port Tack
Sails sheeted
close hauled.
exactly the same
as stbd tack
Difference = 6˚
MHU error 6˚/2 = 3˚ (CAL value)
if Port Tack is low subtract 003˚
if Stbd Tack is low add 003˚
33˚ 27˚
Figure 9 - Masthead Unit Alignment
3.3.3 Measured Wind Speed
As previously stated you are strongly discouraged from
changing the measured wind speed calibration. However,
should you need to do it, then the changes are made in the
system menu under:
WIND
→
MEAS W/S, CALBRATE
→ → → →
MHU CAL
and
WIND
→
MEAS W/S, CALBRATE
→ → → →
MHU OFFS