B&G H2000 Pilot *DISCONTINUED* - Manual (Page 16)

h2000 User Manual
16 HB-0845-06
1.2.4 Halcyon Gyro Processor
The Halcyon Gyro Processor is an interface between the
Halcyon Gyro Stabilised Compass and the B&G Fastnet
Network. It also outputs NMEA heading information at a
rate of 10Hz for use with other marine instruments and
AD10 for use with Radar.
The Halcyon Gyro Processor accepts NMEA data from your
position fixer for magnetic variation information to allow
display and output of True referenced heading.
The Halcyon Gyro Processor can also be used as an
interface to either output NMEA heading and AD10 from a
B&G system compass, or to accept NMEA heading
information from an external compass for use on the h2000
system.
Full details are given in Chapter 3 – Calibration.