B&G H2000 Pilot *DISCONTINUED* - Manual (Page 154)

h2000 User Manual
154 HB-0845-06
A NMEA Full Function Display (FFD) can be used to
interface NMEA 0183 data to an h2000 system.
The Performance Processor can also be used as an
interface for NMEA 0183 data to the h2000 System.
The Performance Processor has two NMEA inputs
and outputs, (one of which is disabled if the RS232C
interface is required).
In the case of multiple NMEA inputs and outputs it should
not be assumed that data input to one device will be
available for output from any other device. For example,
inputting Latitude and Longitude to the NMEA FFD will
not ensure that it is output from the performance unit.
Note
• If the Performance Processor is installed on the system it
should be used as the primary NMEA input device.