B&G H2000 Pilot *DISCONTINUED* - Manual (Page 191)

HB-0845-06 191
13 Depth datum fm xx.x 99.9
14 Compass offset xxx.x 359.9
15 Apparent wind correction x 2
16 Magnetic Variation xxx.x 359.9
17 Next Leg Bearing xxx.x 359.9
18 Tide On N/L Select x 1
5.15.25 Output Calibration Value
####
OC,n(CR)
n = calibration number as above
This command stops all automatic output and returns
C,n,x...x(CR)
5.15.26 Input Damping Value
####
ID,n,xx(CR)
n = damping number
1 Boatspeed Damping
2 Heading Damping
3 Apparent Windspeed Damping
4 Apparent Wind Angle Damping
5 True wind speed damping
6 True wind angle damping
7 Tide Damping in minutes
xx = damping value in seconds (minutes if tide) 0 to 99.
5.15.27 Output Damping Value
####
OD,n(CR)
n = damping number as in previous command.
This command stops all automatic output and returns