B&G H2000 Pilot *DISCONTINUED* - Manual (Page 202)

h2000 User Manual
202 HB-0845-06
5.15.37 True Wind Correction
There are two tables that are used to correct the values of
true wind angle and true wind speed before output to the
display or use in calculation of true wind direction. These
are the values that can be adjusted via the FFD when
calibrating true wind angle and speed and are explained in
Chapter 3 - Calibration
5.15.38 Output True Wind Correction Table Values
####
TO,s,nn(CR)
s = 1 to 6 row number for 5,10,15,20,25 and 30 knots true
wind speed respectively.
nn = 25 to 28 column number. Columns 25 to 27 contain the
true wind angle correction values for Upwind, Reaching and
Downwind sectors respectively. Column 28 contains true
wind speed correction values for 180 degrees down wind.
The wind speed correction values are interpolated to 0 at 90
degrees.
The command stops all automatic output and returns:
U,s,nn,y...y(CR)
if nn
= 25 to 27
yyy.y or -yyy.y = True wind angle correction
value degrees.
if nn = 28
yy.yy or -yy.yy = True wind speed correction
value in knots.
5.15.39 Input True Wind Correction Table Values
####
TI,s,nn,y...y(CR)
s = 1 to 6 row number as in previous command.
nn = 25 to 28 column number as in previous
command.
yy.yy or - yy.yy = True wind speed correction value in knots