B&G H2000 Pilot *DISCONTINUED* - Manual (Page 171)

HB-0845-06 171
Table 6. RS232 Format
INPUT OUTPUT
0
8 data bits (bit 7 ignored) no parity,
RTS handshake 7 data bits, even parity, CTS
Handshake
1
8 data bits (bit 7 ignored) no parity,
RTS handshake 7 data bits, odd parity, CTS
handshake
2
7 data bits, even parity RTS
handshake 7 data bits, even parity, CTS
handshake
3
7 data bits, odd parity RTS
handshake 7 data bits, odd parity, CTS
handshake
4
8 data bits (bit 7 ignored) no parity,
RTS handshake 7 data bits, even parity, no
handshake (CTS ignored)
5
8 data bits (bit 7 ignored) no parity,
RTS handshake 7 data bits, odd parity, no
handshake (CTS ignored)
6
7 data bits, even parity RTS
handshake 7 data bits, even parity, no
handshake (CTS ignored)
7
7 data bits, odd parity RTS
handshake 7 data bits, odd parity, no
handshake (CTS ignored)
5.15.3 Command Syntax
Commands are input as a string of ASCII characters starting
with a
#
character and a two-character command mnemonic
followed by data fields separated by commas. The command
is terminated and execution initiated by a carriage return
(CR).
A command line may not contain more than 88 characters
including the start
#
and the terminating carriage return
(CR). Data parameters may be omitted provided that if a
following parameter is needed the separating commas are
included.
For example:
####
IR,0,,NO DATA,(CR)