B&G H2000 Pilot *DISCONTINUED* - Manual (Page 35)

HB-0845-06 35
We are now able to view this function; press the Page Key,
the configured pages will return and Stored Log will no
longer be displayed. If you wish to keep Stored Log on a
page, then you can configure the page.
2.3.2 Page Display Configuration
The Page Key allows the user to configure four pages per
FFD depending on the required use at that position.
To store the setting in Paragraph 2.3.1 as a permanent new
page, proceed as follows:
1. Press Scroll Up or Scroll Down and scroll text to
CNFG DSP.
Note
Scroll Up or Scroll Down can be used because we are
configuring the whole page, both upper and lower displays.
2. Press Enter, PAGE is shown in the appropriate
display.
3. Press Enter, the digital display is blanked and the
two functions selected are displayed in the text.
Note
At this point, either of the two functions may be changed if
required using the Scroll Up or Scroll Down Keys.
4. Press Enter to accept the new page configuration
and restore the digital display.
You will be able to set up each FFD on the boat for the
people in the immediate vicinity, each crew member being
able to develop their own pages for the information that is
most needed on the FFD. All page displays are held in the
display memory, independent of the power supply.