B&G H2000 Pilot *DISCONTINUED* - Manual (Page 140)

h2000 User Manual
140 HB-0845-06
5.2.3 Trim Angle Sensor
Provides display of Trim Angle and increases the accuracy
of the following functions:
Apparent Wind Angle
Apparent Wind Speed
True Wind Angle
True Wind Speed
True Wind Direction
5.2.4 Barometric Pressure Sensor
Measures the atmospheric pressure, allowing the Main
Processor to record atmospheric pressure changes over
varying periods of time.
5.2.5 Rudder Angle Sensor
The addition of a Rudder Angle can be very useful,
indicating how the boat is balanced.
5.2.6 Sea Temperature Sensor
Measures the seawater temperature.
5.2.7 Air Temperature Sensor
Measures the air temperature.
5.2.8 Load Cells
Up to 12 B&G loadcells can be added to the h2000 system
via the Fastnet databus (refer to the B&G Loadcell
Installation/Calibration Manual). If desired, loadcells may
be connected as non-networked devices and wired directly
to the linear inputs of the h2000 Main Processor. These
loadcells should provide a linear output voltage in the range
of 0 to 6.5 volts.