B&G H2000 Pilot *DISCONTINUED* - Manual (Page 31)

HB-0845-06 31
2. The initial four pages can be reconfigured using
the remaining keys and the menu system as
described in Paragraph 2.3.2.
3. Successive presses of the Page Key displays each
page in rotation.
4. Holding down the Page Key for 2 seconds
initiates control of 20/20 Displays (refer to
Chapter 5 - Options).
2.2.4 Scroll Keys
Two scroll keys are provided: Scroll Up and Scroll Down.
The scroll keys have two functions:
To scroll through the menu choices.
To increase or decrease numerical values, such as
calibration values.
When the Scroll Up Key is first pressed, the large digits in
the upper display are no longer displayed and the name of
the current menu flashes in the upper text. If the key is held
down, then the upper text will scroll through some of the
menu choices. If, when you are scrolling up, the required
menu choice is passed, then the Scroll Down Key will
allow you to reverse back to the required choice. When the
required menu choice is found, the text will flash until
selected by pressing the Enter Key.
2.2.5 Enter Key
The principle use of the Enter Key is to invoke selections
chosen from the menu by the scroll keys. As a general rule,
when any menu choice is flashing, pressing the Enter Key
will select that choice.