B&G H2000 Pilot *DISCONTINUED* - Manual (Page 148)

h2000 User Manual
148 HB-0845-06
4. If the function is missed, press and hold down the
Scroll Up Key and the functions will cycle
through in reverse order. Release the Scroll Up
Key when the required function is displayed.
5. Press the Page Key. The FFD will now return to
normal operation and the 20/20 will display the
selected function.
5.5.5 Re-configuring 20/20 Display
In addition to the 14 pre-set functions, any one of the 20/20
Displays may be re-configured to show any other function
available to the system. This feature allows any 20/20 to be
set-up to show the information most useful to the user at
that station in the yacht.
The procedure for re-configuring a 20/20 function is as
follows:
1. At the FFD, press and hold down the Page Key
for at least 3 seconds. The FFD will change to
show the function displayed on the 20/20 together
with the display number.
2. Using the Scroll Down Key, cycle through the
20/20 numbers and select the one required.
3. Using the Scroll Up Key select the function you
wish to change.
4. Press the Enter Key and the function currently
being displayed on the 20/20 will commence to
flash.
5. Press and hold down the Scroll Up Key and cycle
through the normal FFD Menu until the required
function choice is displayed (e.g. NAVIGATE).
6. Press and hold down the Scroll Down Key until
the required operational choice is displayed (e.g.
COURSE).
7. Press the Enter Key to accept the selection.