B&G H2000 Pilot *DISCONTINUED* - Manual (Page 121)

HB-0845-06 121
20/20
DISPLAY
20/20
DISPLAY
135-0A-130
Network Cable
PROCESSOR UNIT
HALCYON
FFD
FFD
Network Cable
135-0A-130
PROCESSOR UNIT
20/20
DISPLAY
HALCYON FFD
135-0A-130
Network Cable
THE NETWORK TERMINATOR 239-10-056 IS A BLACK TWO WIRED COMPONENT WITH A RESIST ANCE
OF 100 OHMS. TWO ARE SUPPLIED WITH INSULATING SLEEVING TO PREVENT SHORTING OF THE WIRES.
A NETWORK TERMINATOR MUST BE FITTED ACROSS THE GREEN AND WHITE NETWORK DATA WIRES OF
THE LAST UNIT OR JUNCTION BOX AT EACH END OF THE NETWORK CABLE. (SEE EXAMPLES BELOW)
WHEN ADDING MORE DISPLAYS OR UNITS TO THE NETWORK, ENSURE THAT THE TERMINATOR IS MOVED
TO THE ENDS OF THE NETWORK CABLE. NEVER FIT MORE THAN TWO TERMINATORS ON THE NETWORK.
UNITS AND DISPLAYS MAY BE FITTED IN ANY ORDER ON THE NETWORK
SINGLE NETWORK CABLE, TERMINATED AT PROCESSOR UNIT
AND LAST JUNCTION BOX.
TWO NETWORK CABLES FROM PROCESSOR UNIT,
TERMINATED AT LAST JUNCTION BOX AT EACH END
TERMINATOR
239-10-056
239-10-056
TERMINATOR
NETWORK
INSERT
GROMMET PLUG
EXAMPLE 1
EXAMPLE 2
R Blk Scn W G
R Blk Scn W G
10 11 12 13 14 15 16 17 18 19 20 21
NETWORK TERMINATOR INSTALLATION
IMPORTANT NOTE
NETWORK