B&G H2000 Pilot *DISCONTINUED* - Manual (Page 187)

HB-0845-06 187
####
TO,s,nn(CR)
s = 1 to 6 row number for 5,10,15,20,25 and 30 knots
Apparent Windspeed respectively.
nn = 01 to 24 column number. Columns 01 to 12 are for 20,
25, 30, 35, 40, 60, 80, 100, 120, 140, 160 and 180 degrees
Apparent Wind Angle respectively and contain apparent
wind speed correction values. Columns 13 to 24 for 20, 25,
30, 35, 40, 60, 80, 100, 120, 140, 160 and 180 degrees
Apparent Wind Angle respectively and contain apparent
wind angle correction values.
The command stops all automatic output and returns:
U,s,nn,y...y(CR)
if nn = 01 to 12
yy.yy or -yy.yy = Windspeed correction value in knots
if nn = 13 to 24
yyy.y or -yyy.y = Wind Angle correction value in degrees.
The command may also be used to output a complete row,
or the entire wind correction table by omitting one or more
parameters. For example:
#TO,3(CR)
outputs the whole of row 3 in the format:
UR,r,cc,-ww.ww,...cc,-xxx.x,...cc,-yyy.y,...cc,zz.zz
where
r is the row number (1..6)
cc is the column number (01..28)
ww.ww is the apparent wind speed correction
xxx.x is the apparent wind angle correction
yyy.y is the true wind angle correction
zz.zz is the true wind speed correction
In general, these values can be either positive or negative.
Negative values will be preceded by a minus sign.