B&G H2000 Pilot *DISCONTINUED* - Manual (Page 208)

h2000 User Manual
208 HB-0845-06
CHAPTER 6: DIAGNOSTIC DATA
6.1 FFD DIAGNOSTICS
The FFD contains a number of diagnostic functions. These
allow the FFDs own keys, display and memory to be tested
and also perform some checks on other parts of the system
via the network. One of the more useful of these tests
enables the user to determine the software version numbers
of the processor units in the system. This information is
often useful when contacting service agents.
6.1.1 Diagnostic Function Selection
To use the diagnostic functions they must be selected on the
required FFD when the system is switched ON as follows:
1. When switching ON the system press Enter and
hold until DIAGNOST appears on the upper text
in an otherwise blank display.
2. Press Enter and the first test option appears
which is KEYTEST.
3. The required test can then be selected using the
Scroll Up and Scroll Down Keys (see below for
details of the tests).
4. Press Enter to start the test.
5. On completion of each test, press Scroll Up or
Scroll Down to scroll to the next test. Press Enter
to start the test.
6. To return the display back to normal operation
press the Page Key.
7. Provided that the power is not switched off or a
system reset performed, the diagnostics can be re-
entered by holding Enter down and pressing the
On/Off Lights Key.