B&G H2000 Pilot *DISCONTINUED* - Manual (Page 34)

h2000 User Manual
34 HB-0845-06
Heading/Course Over Ground
Heading/Boat Speed
Distance to Waypoint/Bearing to Waypoint
Tide Set/Tide Rate
Note
The NAV key may be configured to show waypoint
information in either Great Circle or Rhumb modes. Refer
to Para 2.3.3 for further details.
2.3 EXAMPLES OF OPERATION
The general principle of operating the h2000 will be made
clear by the following examples of function and page
selection, damping and calibration adjustment.
2.3.1 Function Selection
Our first example will be to select another function for one
of the pages. The new function is Stored Log and since we
want to place this function in the bottom display we will be
using the Scroll Down Key.
1. Press the SPD/DEP Key until the display is
showing BOAT SPD in the upper display and
DEPTH in the lower display.
2. Press Scroll Down, the lower text now shows
DEPTH flashing, the upper display is not affected.
3. Press Scroll Down until the lower text shows
LOG flashing, the upper display is not affected.
4. Press Enter, the lower text now shows STD LOG
flashing, the upper display not affected.
5. Press Enter again, the lower display now shows
required function, the upper display is not
affected.