B&G H2000 Pilot *DISCONTINUED* - Manual (Page 74)

h2000 User Manual
74 HB-0845-06
This function is linked to Layline Distance. The information
displayed shows the time to go before reaching the
appropriate layline. A value of zero indicates time to tack or
gybe.
2.9.48 Time to Waypoint
Menu heading: WAYPOINT
Function text: ETA WPT
Update rate: Provided by the position fixer
Units: Hours, minutes
Note
1. Also gives ETA. Requires interfaced position
fixing system.
This is calculated directly by the position fixer, and is based
on your speed over the ground towards the mark, which is
assumed to be constant.
2.9.49 Trip Log
Menu heading: LOG
Function text: TRIP LOG
Update rate: 1Hz
Units: Nautical miles
Note
1. Can be reset independently of other trip functions.
This is the log for recording individual trip distances, it
displays the distance travelled from the time the function
was started in nautical miles. It must be remembered that
this is the distance sailed through the water, not over the
ground. It also forms part of the calculation for Average
Speed. A particularly useful feature is that when reset prior
to the start of the race, the Timer counts down to zero, the
Trip Log (and any other trip functions that have been reset)
start automatically.