B&G H2000 Pilot *DISCONTINUED* - Manual (Page 33)

HB-0845-06 33
Expand Function Displays When displaying the LOG ,
TIMER, LATITUDE and LONGITUDE functions the
Enter Key can be used to expand the display. Normally the
Log function displays nautical miles to two decimal places,
i.e. 99.99nm (maximum). One press of the Enter Key
expands the display to 0099nm, giving a maximum
available display of 9999nm if required. Similarly the
TIMER function normally displays a minutes and seconds
reading. Expansion by the Enter Key displays hours and
minutes instead.
2.2.6 Speed/Depth (SPD/DEP) Key
Pressing the SPD/DEP Key will select the Speed/Depth
Display. After selection of the Speed/Depth functions,
successive operations of the SPD/DEP Key will display the
following information in a fixed order:
Boat Speed/Depth
Boat Speed/Speed Over Ground
Boat Speed/Apparent Wind Angle
Boat speed/True Wind Speed
2.2.7 Wind (WIND) Key
Pressing the Wind Key will select the Wind Display. After
selection of the Wind Display, successive operations of the
Wind Key will display the following information in a fixed
order:
Apparent Wind Speed/Apparent Wind Angle
True Wind Speed/True Wind Angle
True Wind Speed/True Wind Direction
Velocity Made Good/True Wind Angle
2.2.8 Navigation (NAV) Key
Pressing the NAV Key will select the Navigation Display.
After selection of the Navigation Display, successive
operation of the NAV Key will display the following
information in a fixed order: