B&G H2000 Pilot *DISCONTINUED* - Manual (Page 30)

h2000 User Manual
30 HB-0845-06
2.2.2 Power/Light Key
This key controls the application of power to the system and
the level of illumination at all displays.
One short press of this key applies power to the h2000
System and the display is activated to show the last page
used on the previous operation. A second short press of the
key provides full background illumination on all system
displays. Further short presses of the key decrease the
illumination in three stages from full brightness to OFF. The
next press of the key enables full illumination. This
operation at any one h2000 Display invokes the same
sequence on all h2000 Displays connected to the system.
However, display lighting can be localised so that the level
is adjustable for individual displays.
To switch the system OFF press and hold down the key for
two seconds. After this time lapse, the message POWER
OFF appears in the upper text, release the key and after a
further two seconds the system switches OFF.
2.2.3 Page Key
Operation of this single key enables the user to quickly
access eight functions of the h2000 System, by selecting any
one of the four pre-set page displays (2 functions per page)
with a simple key press. This key also allows the operator to
prematurely terminate any other function, such as
calibration, and return to the normal page display.
Default Pages:
• True Wind Angle/Opposite Tack
• True Wind Direction/Timer
• VMG to Waypoint/Cross Track Error
• Course Over Ground/Speed Over Ground
Notes
1. If you are lost in the system, press the Page Key
to immediately return to the top level display.