B&G H2000 Pilot *DISCONTINUED* - Manual (Page 32)

h2000 User Manual
32 HB-0845-06
The Enter Key is also used to enter data. When the value
that needs changing is displayed on the screen, it is altered
by pressing the Enter Key, which starts the value flashing,
then using the Scroll Up or Scroll Down Keys for change
to the required value. Press the Enter Key again to complete
the operation.
The use of the Enter Key differs depending on whether you
want to select a Function Menu Choice or an Operation
Menu Choice.
Function Menu Choice If a Function Menu Choice
is selected from the system menu using the Scroll
Up Key, the new function will appear in the upper
display when the Enter Key is pressed.
Operation Menu Choice If an Operation Menu
Choice is selected from the system menu using the
Scroll Up Key, the new operation will appear on the
upper display when the Enter Key is pressed.
Therefore, to select a different FUNCTION in the
upper display the Scroll Up Key must be used.
To perform an operation (such as changing a
calibration value) on the function in the upper
display the Scroll Down Key must be used.
The two additional uses of the Enter Key are as follows:
Accept and Reset Alarms When an alarm sounds (if the
audible alarm is fitted) or flashes at the FFD, two presses of
the Enter Key stops the warning and resets the alarm.