B&G H2000 Pilot *DISCONTINUED* - Manual (Page 184)

h2000 User Manual
184 HB-0845-06
where r is the row number (0..9)
cc is the column number (01..22)
uu.u is the true wind speed set for this row
vv.vv is the boat speed
ww.ww is the optimum upwind vmg
xxx is the true wind angle for upwind vmg
yy.yy is the optimum downwind vmg
zzz is the true wind angle for downwind
vmg
Because output lines can only be a maximum of 80
characters it takes several lines to output a complete row.
Each line begins with
PR,r,cc....
to indicate which row and column follows.
In a similar way, the command:
#PO(CR)
outputs the entire table, row by row, in the above format.
5.15.16 Input Polar Table Value
####
PI,s,nn,yy.yy(CR)
s = 0 - 9 (as in previous command)
nn = 02 - 22 (as in previous command)
This command permits any single element of the polar table
to be changed.
Example:
The command
####
PI,7,05,07.45(CR)
Will cause the polar table element corresponding to a wind
speed of 20 knots and a true wind angle of 50 degrees to be
changed from 7.40 Knots to 7.45 Knots.
Likewise command
####
PI,0,22,150(CR)