Rockwell Automation Motion Analyzer Software - Manual (Page 65)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 65
Welcome to Motion Analyzer Software Chapter 1
1.2.4. Export – Import Tab
The Export - Import tab contains two sections.
Figure 55 - Export - Import Tab Options
Table 41 - Export - Import Tab Descriptions
1.2.4.1. Export to RSLogix 5000 Wizard
Once you have selected a motor and drive in Motion Analyzer software, you can
export motion system information to RSLogix 5000 software and use it in the
next step of your design process. You can generate an RSLogix 5000 file (.L5X),
version 18.00, 19.00, 20.00, or 21.00. Applications can be exported to
RSLogix 5000 software as new .L5X files or as updates to existing .L5X files.
Options Description
Export
(label 1 in
Figure 55 )
Project Data to Word Exports the application data to a Microsoft Word document.
Profile Data
Launches the export wizard to let you export the profile data of the
selected axis. Refer to
More Options Profile Editor Mode on page 142 .
BOM to Word Exports Bill of Material to Microsoft Word document.
BOM to Excel Exports Bill of Material to Microsoft Excel file.
Export To RSLogix 5000
Exports motion system information to RSLogix™ 5000 software to
use it in the next step of your design process.
Import
(label 2 in
Figure 55 )
Axis Data
Imports the axis data from another axis either of current application
or from any other Motion Analyzer application.
Profile Data
Imports the Profile data for selected axis. Imported Profile Data must
have been previously exported by Motion Analyzer software.