Rockwell Automation Motion Analyzer Software - Manual (Page 44)

44 Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
Chapter 1 Welcome to Motion Analyzer Software
1.2.2.4.2.4. Control Power Tab
Click the Control Power tab for utilization views and to select the number of
sensor inputs and outputs.
Figure 29 - Control Power Tab
Table 25 - Control Power Tab Descriptions
Figure 30 - Control Power Tab (details arrow)
Options Description
Utilizations
(label 1 in
Figure 29
Control
Power This bar graph displays the percentage of power utilized by all IDM units to the
maximum power that can be supplied by IPIM module.
Total Displays the sum of power utilized by all the IDM units.
IPIM Displays the maximum power that can be supplied by the selected IPIM module.
Selection for Control
Power Usage
(label 2 in
Figure 29 )
Summary
view From the pull-down menu, choose the quantity of each of I/O Sensor. Summary
view displays the control power usage and control voltage for each IDM unit.
Detailed View
(label 3 in
Figure 29 )
Click the Details arrow (refer to Figure 30 ) to display complete information for each IDM unit.
This table is hidden by default.