Rockwell Automation Motion Analyzer Software - Manual (Page 207)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 207
Understanding Your System Solution Chapter 3
3.1.1. Automatic
Follow these steps to have Motion Analyzer software to make the motor, drive,
and/or gearbox selections for you.
1. In the Automatic field, select Motor, Drive, and Gearbox (if present).
2. Click Search.
The Search in Progress dialog box opens.
When the search is complete, the Solution List opens with a list of motor/
drive combinations and a selection based on the application requirements
that you entered previously.
3. Click View Solution.
The Component Details and Axis System Performance windows open.
If the automatic selection process does not find a solution, it means that no motor
or drive in the specified family is capable of performing the task. When this
happens, the result is No Solution Found, which means you should try one or
more of the following:
• Select a Motor Mounted Gearbox in the
Transmissions Tab on page 191 .
• Try a bigger family of motors and drives.
• Reduce application requirements until a solution is found.
• Use Torque Analysis, within the
Efficiency Analysis tool on page 227 , to
determine which parameters are dominant. This may indicate which factor
to investigate.
• Use
Tolerance/Design Analysis on page 222 to explore how much a
parameter should change to obtain a passing solution.