Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 91)

Configuring FactoryTalk Historian Chapter 5
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 91
The tab contains two tables that display the following
information:
Item name Description
Interface Type Pools of licenses (Rockwell and General) assigned to the
server.
This information cannot be edited.
Interface Type
Allocation Abbreviated names of interface types (or point sources) to
which you can allocate licenses from the license pools.
The FTLD interface type is the default type and it cannot be
edited.
Points in Use The number of points already configured for collecting data
from a given interface type.
This information is updated automatically and cannot be
edited.
Limit The maximum number of licenses that is allocated to a
license pool or an interface type.
• For the license pools, the limits are collected from the
license activations. This information cannot be edited.
• For the FTLD interface type, the limit equals the total
number of unallocated licenses from both Rockwell and
General license pools. This information is updated
automatically and cannot be edited.
2. In the Interface Type Allocation column, type the
abbreviated name of the interface type (or point source) to
which you want to allocate a license limit. See Types of
Licenses (page 80) for more information on the interface
types.