Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 106)

Chapter 5 Configuring FactoryTalk Historian
106 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
The services are removed when you delete the interface instances in
FactoryTalk Administration Console.
NOTE
If you want to take advantage of the buffering feature, Rockwell
Automation recommends that you install the FactoryTalk Historian Live
Data Interface on a remote computer, typically the computer where the
data server is installed.
The buffering subsystem stores time-series values to the buffer when
the remote interface computer cannot communicate with the
FactoryTalk Historian SE server.
NOTE
FactoryTalk Historian SE supports the PI Buffer Subsystem only. It does
not support the API Buffer Subsystem.
To enable buffering on the computer with the FactoryTalk
Historian Live Data Interface installed:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE System Management Tools. The System
Management Tools dialog box appears.
2. On the File menu, click Connections. The Connection
Manager dialog box appears.
3. Select the FactoryTalk Historian SE server to which you want
to connect.
Enable Buffering