Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 112)

112 Rockwell Automation Publication 290D-UM001A-EN-P - June 2012
Chapter 4 Bulletin 290D/291D/294D Programmable Parameters
Zone4ProducedMacId
The MacId address of the device in Zone 4
Parameter Number 109
Access Rule SET
Data Type USINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 64
Default Value 64
Zone1Health
The status of the DeviceNet connection to
the Zone 1 device
0=Healthy
1=NotHealthy
Parameter Number 110
Access Rule GET
Data Type BOOL
Group ZIP
Units –
Minimum Value 0
Maximum Value 1
Default Value 0
Zone2Health
The status of the DeviceNet connection to
the Zone 2device
0=Healthy
1=NotHealthy
Parameter Number 111
Access Rule GET
Data Type BOOL
Group ZIP
Units –
Minimum Value 0
Maximum Value 1
Default Value 0
Zone3Health
The status of the DeviceNet connection to
the Zone 3device
0=Healthy
1=NotHealthy
Parameter Number 112
Access Rule GET
Data Type BOOL
Group ZIP
Units –
Minimum Value 0
Maximum Value 1
Default Value 0