Leica Biosystems ASP6025 User Manual
Leica asp6025, Vacuum tissue processor
Table of contents
Document Outline
- 1. Important Information
- 1.1 Symbols in the text and their meanings
- 1.2 Instrument type
- 1.3 Qualification of personnel
- 1.4 Intended use of instrument
- 2. Safety
- 2.1 Safety notes
- 2.2 Warnings
- 2.3 Safety features on the instrument
- 3. Instrument Components and Specifications
- 3.1 Standard delivery - packing list
- 3.2 Technical Data
- 3.3 Compatible reagents
- 3.4 Overview
- 3.4.1 Instrument components and accessories
- 3.4.2 Instrument rear panel - terminals
- 3.4.3 Instrument specifications
- 4. Initial Operation
- 4.1 Unpacking the instrument
- 4.2 Basic instrument/hardware
- 4.2.1 Installation site requirements
- 4.3 Installing the tube for external exhaust air (optional)
- 4.4 Connecting the power supply
- 4.4.1 The retort
- 4.4.2 Counter area
- 4.4.3 Specimen baskets
- 4.4.4 The monitor
- 4.4.5 The paraffin station
- 4.4.6 The paraffin baths
- 4.4.7 Drawer with RTU-bottles
- 4.4.8 Reagent cabinet with system bottles
- 4.4.9 The drip tray
- 4.4.10 Adhesive labels for system bottles and RTU-bottles
- 4.5 Switching the instrument on
- 4.6 Alarm functions
- 4.7 Touchscreen functions
- 4.8 Switching off the instrument correctly
- 5. Operation
- 5.1 System configuration - configuring the instrument parameters
- 5.1.1 The Installation menu
- 5.1.2 System settings
- 5.1.3 User profiles
- 5.1.4 The System monitor menu
- 5.1.5 The Service functions menu
- 5.1.6 System status
- 5.1.7 The Run log
- 5.1.8 Long-term error log
- 5.1.9 Saving or loading data
- 5.1.10 The Smart Screen
- 5.2 Reagents
- 5.2.1 Editing the reagent list
- 5.2.2 The RMS system - adjusting warning threshold values
- 5.2.3 The reagent status
- 5.2.4 Configuring the stations
- 5.2.5 The Reagent groups menu
- 5.2.6 Ethanol rotation
- 5.2.7 Adjusting the threshold value for ethanol rotation
- 5.2.8 Replacing xylene
- 5.3 Infiltration programs
- 5.3.1 Display of the program list
- 5.3.2 Adding and modifying programs
- 5.4 Reagent handling
- 5.4.1 Filling/draining reagents
- 5.4.2 Refilling paraffin
- 5.4.3 Draining a paraffin bath
- 5.5 Running programs
- 5.5.1 User-defined programs
- 5.5.2 Favorites
- 5.5.3 Defining Favorite programs
- 5.5.4 Starting a program
- 5.5.5 Ending a program
- 5.6 Permanently installed infiltration programs
- 5.6.1 Programs with automatic ethanol rotation
- 5.6.2 Preinstalled xylene infiltration programs
- 5.6.3 Xylene-free infiltration programs
- 6. Cleaning and Maintenance
- 6.1 Cleaning programs
- 6.1.1 View cleaning programs
- 6.1.2 Running cleaning programs
- 6.1.3 Cleaning protocols
- 6.1.4 SMART cleaning
- 6.2 General instrument cleaning
- 6.2.1 Daily cleaning and maintenance
- 6.2.2 Periodic cleaning and maintenance
- 7. Troubleshooting
- 7.1 Troubleshooting
- 7.1.1 Power failures
- 7.1.2 Instrument procedure in case of power failure
- 7.2 Malfunctions in the program sequence
- 7.3 Typical fill or drain problems
- 8. Optional Accessories
- 9. Warranty and Service
- 10. Log for Instrument Status