Leica Biosystems CM1100 User Manual
Leica cm1100, Cryostat
Table of contents
Document Outline
- 1. Important information
- 2. Table of contents
- 3. Safety instructions for handling the instrument
- 3.1 Safety features
- 3.1.1 Locking the handwheel
- 3.1.2 Knife guard
- 3.2 General hazards
- 4. Technical data
- 5. General description
- 5.1 Leica CM 1100 Overview
- 5.2 Product description
- 5.3 Standard delivery range
- 6. Unpacking and installation
- 6.1 Unpacking
- 6.2 Site requirements
- 6.3 Transport to the installation site
- 7. First use of the instrument
- 7.1 Connection to mains power
- 7.2 Installing the accessories
- 7.3 Switching on
- 7.4 Functions of the control unit
- 7.4.1 LEDs
- 7.4.2 Function keys
- 7.4.3 Setting user definable parameters
- 7.4.4 Starting and terminating a manual defrost cycle
- 7.5 Temperature selection chart (in minus °C)
- 8. Daily operation
- 8.1 Specimen discs
- 8.1.1 Specimen freezing
- 8.1.2 Fixing the specimen disc in the specimen head
- 8.2 Knife holder CE
- 8.2.1 Changing the rear pressure plate
- 8.2.2 Adjusting the rear pressure plate
- 8.2.3 Adjusting the front pressure plate
- 8.2.4 Inserting the blade
- 8.2.5 Lateral displacement
- 8.2.6 Adjusting the anti-roll plate
- 8.2.7 Replacing the glass anti-roll plate
- 8.3 Coarse feed wheel
- 8.4 Trimming
- 8.5 Sectioning
- 8.6 Section transfer
- 8.7 Defrosting
- 8.7.1 Programming an automatic defrost cycle
- 8.7.2 Starting a manual defrost cycle
- 9. Trouble sh ooting
- 10. Cleaning and disinfection
- 10.1 Cleaning
- 10.2 Spray disinfection with Leica Cryofect
- 10.3 Removal of the microtome
- 10.4 Reassembly of the microtome
- 11. Maintenance
- 11.1 General maintenance
- 11.2 Fuse replacement
- 12. Optional accessories
- 12.1 Mobile heat extractor
- 12.2 Thermal block
- 13. Warranty and service
- 14. Decontamination Certificate (master)
- 16. Information for the People´s Republic of China