Leica Biosystems SP2600 User Manual
Leica sp2600, Ultramilling attachment
Table of contents
Document Outline
- 1. Important information
- 1.1 Symbols in the text and their meaning
- 1.2 Designated use
- 1.3 Information on this instruction manual
- 2. Safety
- 2.1 Safety regulations
- 2.2 Built-in safety devices
- 2.3 Safety instructions
- 3. Technical Data
- 4. Installation
- 4.1 Overview - Leica SP2600 Ultramilling attachment / basic instrument Leica SM2500 - instrument parts / functions
- 4.2 Leica SP2600 standard delivery
- 4.3 Site requirements
- 4.4 Unpacking, transport, installation
- 4.5 Installing the Leica SP2600 ultramilling attachment
- 4.6 Connecting the vacuum cleaner
- 4.7 Installing additional accessories
- 5. Operation
- 5.1 Overview of chapter 5 'Operation'
- 5.2 Adjusting the pre-millers in the calibrating device
- 5.3 Adjusting the finishing millers in the calibrating device
- 5.4 Specimen holder systems - how to combine individual components
- 5.5 Clamping specimen
- 5.5.1 Installing the base plates in the basic instrument
- 5.5.2 Clamping the specimen holders in the base plate with dove tail guide
- 5.5.3 Clamping the vacuum stages on/in the base plates
- 5.5.4 Connecting the vacuum pump / placing specimens onto the vacuum stages
- 5.6 Preparatory steps prior to the milling procedure
- 5.7 Pre-milling
- 5.7.1 Perspective view of the pre-milling procedure
- 5.8 Finishing milling
- 5.8.1 Perspective view of the finishing milling procedure
- 5.9 Switching the instrument off (switching off the control unit
- 6. Troubleshooting
- 7. Cleaning, disinfection and maintenance
- 7.1 Cleaning and disinfection
- 7.2 Maintenance
- 7.2.1 Resharpening the millers
- 7.2.2 Replacing the light bulb in the calibration device
- 8. Overview - accessories
- 8.1 Miller holders and millers
- 8.2 Base plates for specimen holders and vacuum stage adapters
- 8.3 Specimen holders
- 8.4 Vacuum stage adapters
- 8.5 Vacuum stages and matching lids / perforated specimen holders
- 8.6 Vacuum pumps
- 8.7 Additional accessories
- 9. Warranty and service