Leica Biosystems ASP6025 - Manual (Page 128)

126 Instructions for Use V 2.2 RevI – 08/2013
Setting the end time
• Press the FINISH TIME button to call up the entry window
for the end time ( Fig. 184 ).
There are three options for setting the end time:
• Enter the end time at which the program is to terminate
using 24-hour notation.
• Select NOW if the program is to be terminated without a
waiting time.
• Select TIME REQUEST if the system is not to prompt for input
of a desired end time until the program is started.
• Press OK to confirm the ending time.
Defining Favorite programs
(continued)

Fig. 184
Assigning a day for the end time
If an end time has been assigned to a Favorite program, a spe-
cific weekday can also be set on which the program is to end.
• Press the DAY button, the selection window for the days of
the week will appear.
• Select the desired day from the list and confirm with OK
( Fig. 185 ).

Fig. 185
5. Operation
If an end time is assigned to a Favorite pro-
gram, the delay step is prolonged so that the
program is terminated at exactly the prese-
lected time.