Leica Biosystems ASP6025 - Manual (Page 88)

86 Instructions for Use V 2.2 RevI – 08/2013
When the DETAIL LEVEL button is pressed, the messages with the given detail level are displayed.
If the button is pressed repeatedly, the display in the table can be filtered according to the individual
levels.
The display on the button changes correspondingly.
Display of the three levels is carried out as follows:
Level 1 - 3: All event messages are displayed.
Level 1 - 2: The following are displayed:
Events with the highest priority level.
Events with the medium priority level.
Level 1: The following are displayed:
Only events with the highest priority level.
The Run log
(continued)
A priority level is assigned to each event.
There are three different levels:
Level 1: High priority events
Level 2: Medium priority events
Level 3: Low priority events
5. Operation
Level 1 is set by default. If the operator exits a log view, the detail level for this
view is saved. When the view is opened again, the saved display level is used.
This does not apply if the instrument is restarted. In this case, the Level 1 dis-
play set by default is used.