Leica Biosystems ASP6025 - Manual (Page 36)

34 Instructions for Use V 2.2 RevI – 08/2013
4. Initial Operation
Unpacking the instrument
(continued)
Removing the transport anchors
• After installing the monitor, you have to remove all transport
anchors (adhesive tape and foam parts).
• First, carefully remove all blue strips of adhesive tape (105)
that secure the doors and the drawer of the instrument.
105
Fig. 17
9
Fig. 18
• In the retort, you also have to remove the strip of adhesive
tape (105) that secures the cover of the level sensors
(
Fig. 19 ).
• Then, open the drawer (9) and remove all foam parts there
( Fig. 18 ). Also remove the six dark gray molded parts (106)
from the necks of the RTU-bottles.
Fig. 19
106
19
19
105
9
• Remove the adhesive tape (105) from the lid of the retort
(19) ( Fig. 17 ).
105