Leica Biosystems CM1850 UV User Manual
Leica cm1850, Cryostat
Table of contents
Document Outline
- 1.1 Symbols used in this manual and their meaning
- 1.2 Qualification of personnel
- 1.3 Designated use
- 1.4 Instrument type:
- 2. Safety
- 2.1 Safety features
- 2.1.1 Locking the handwheel
- 2.1.2 Knife guard
- 2.2 General information on instrument design and safe handling
- 2.3 Operating conditions
- 2.5 Cleaning and disinfection
- 2.6 Removal of the microtome
- 2.7 Maintenance
- 3. Technical data
- 4. Unpacking and installation
- 4.1 Site requirements
- 4.2 Transport to the desired location
- 4.3 Standard delivery
- 4.4 Handwheel assembly
- 5. Setup
- 5.1 Connection to mains power
- 5.2 Prior to operation
- 5.3 Leica CM1850 - Overview
- 5.4 Mains switch and automatic mains fuse
- 5.5 Turning the instrument on
- 6. Control panel operation
- 6.1 Control panel 1
- 6.2 Programming the desired values
- 6.2.1 Setting the time
- 6.2.2 Setting the automatic defrost time (cryochamber)
- 6.2.3 Selecting the cryochamber temperature
- 6.2.4 Activation of the Peltier element
- 6.2.5 Manual defrosting of the quick freeze shelf
- 6.2.6 Manual defrosting of the cryochamber
- 6.3 Display lock
- 6.4 Control panel 2 - Electric coarse feed