Leica Biosystems ASP6025 - Manual (Page 54)

52 Instructions for Use V 2.2 RevI – 08/2013
4.4.10 Adhesive labels for system bottles and RTU-bottles
4. Initial Operation
The standard delivery of the ASP6025 includes two sets of adhesive labels.
This includes:
• 20 x labels for the system bottles in the reagent cabinet.
• 10 x labels for the RTU-bottles in the drawer.
Labels for system bottles ( Fig. 54 )
The labels for system bottles come in eight different colors.
The colors are adapted to the selectable color palette for the
individual reagent groups in the instrument.
The labels (72) are applied to the front of the system bottles
(15) as shown in
Fig. 55 .
The surface on the system bottles must be clean and dry; then
apply the label and press on firmly—especially at the edges.
The labels are resistant to the reagents used in the instrument.
The station number can be noted on the label as well as the date
when the reagent specified in the color table was commissioned
(
Fig. 55 ).
For more information, see Chapter 5.2.3.
Fig. 54
Fig. 55
72
15
Following manual filling, it is essential to
manually adjust the SMART screen settings in
the reagent status ( see Chap. 5.2.1 ).