Leica Biosystems ASP6025 - Manual (Page 132)

130 Instructions for Use V 2.2 RevI – 08/2013
Fig. 189 shows the SMART SCREEN while an infiltration pro-
gram is running.
Starting a program
(continued)
Fig. 189

Fig. 190

The FINISH TIME button displays the time
when the currently running program will
end. If events occur that cause the end time
to be delayed, the end time display here will
be updated accordingly.
The rotating green and white symbol in-
dicates that a protocol is currently being
processed.
The number of cassettes that are being pro-
cessed in the retort is displayed.
The work step currently running and the
time until it ends are displayed in the field
below that.
You can switch from the graphical to the table display by touch-
ing the TABLE (
Fig.190) . Pressing the GRAPHIC button then
returns you to the SMART SCREEN.
A running program must be stopped in order
to modify it; to do this, press the PAUSE but-
ton. Then touch the FINISH TIME button and
enter a new end time.
The end time for a running program can only
be changed while the delay step has not yet
been completed and providing the value en-
tered is greater than the step duration that
has already been processed.
5. Operation